Becker TRAFFIC ASSIST Z101 Operating Instructions Manual page 36

>>> NAVIGATIONAL MODE
Displaying destination on the map
Once the destination has been entered,
> D
you can display it in the map of the sur-
> GB
rounding area.
> Press the
In map
> F
tination selected on the map.
> I
> E
> NL
The address is displayed on the map.
The following options are available using
the buttons in the right-hand section of
the screen:
• Set the options for the driving profile
using the
Options
• Start route guidance directly to the se-
lected destination using the
ton.
36
Options for the drive profile
You can also set your driving profile in the
address entry field. Press the
ton for this purpose. The settings made
key to display the des- here have an effect on calculation of the
estimated journey times and the length of
the route.
> Select the required settings.
> Press the
options.
button.
but-
Start
but-
Options
button to display the other
Option Meaning
Select the mode of travel
Profile:
by pressing the button.
Select one of the options
Routing type
by pressing the button:
• - the optimal
optimum
route in terms of travel
time and mileage
• - the fastest route
fast
in terms of travel time
• - the shortest
short
route in terms of
mileage
• - the most
scenic
winding route.
Select either
TMC Yes
If is selected, the
Yes
traffic announcements
received are taken into
account when the route
is calculated and the
route is recalculated au-
tomatically.
or .
No