Table of Contents
Advertisement
The display changes to the current core
temperature.
3
If OVEN FUNCTIONS is already dis-
played in the text line, before the de-
sired core temperature has been set,
then press the SELECTION
until the
perform the setting.
3
The core temperature is displayed from 30°C.
3. Set the oven function and, if necessary, the oven temperature.
3
Within a few minutes, a provisional end time is calculated, at which the core tempera-
ture set will be reached. This time is constantly recalculated and updated in the display.
For the system to work, it is essential that the meat probe is in the meat and in the sock-
et at the start of the cooking process and that it is not removed during the cooking
process.
During the calculation phase, the display for the time of day and meat's core tempera-
ture shows a "flashing square".
As soon as the pre-set core temperature is reached, a signal sounds and the appliance
switches itself off automatically.
4. Press any button to switch off the signal.
Changing the core temperature at a later time:
Press the SELECTION
the core temperature set appears in the temperature display.
Then change the temperature using the
Removing the meat probe
1
Warning: The meat probe is very hot. There
is a risk of being burned when removing the
plug and the tip of the meat probe.
1. Remove the meat probe's plug from the
socket and take the meat out of the oven.
2. Switch off the appliance.
3
You will find instructions on the meat pro-
grammes with meat probe in the section
"Automatic programmes".
button,
symbol flashes and then
button repeatedly until the MEATPROBE function flashes and
–—OVEN FUNCTIONS
ý ý ý
888û c
þ
þ ü þ 8ü 3 ü 0 û
wm¸¹º»¼-+
or
button.
Using the Oven
ýþ ë ý
ý
ý
8
ý
88. 8 ú 8
19
ý ý
ý ý
Advertisement
Table of Contents
