The Calculate Key; The Start Key; Navigation Menu: Enter Coordinates - Becker TRAFFIC ASSIST 7977 Instructions For Use Manual

Individual entries can be
moved using these but-
tons.

The Calculate key

A planned route can also be calculated
without GPS reception so that you can get
an overview of the journey.
When doing this, the first route point
specified is used as the starting point for
the route.
Note:
During navigation, your current location
is the starting point used. The first leg is
then the journey to the first route point
specified.
> Press the button
Calculate
total distance and probable length of
the journey calculated for this route.
The Routing options entry window is
opened.
> Define the settings you want.
> Press the
The route is calculated. A window in-
forms you of the progress of the calcula-
tion.
Once the calculation is complete, the total
distance from the first to the last points on
the route and the probable length of the
journey for this route are displayed in the
Route planning window under the list of
route points.
to have the

The Start key

button. > Press the
The route options are displayed again.
> Press the
Note:
If no GPS signal is available, route guid-
ance is started automatically as soon as a
signal is received.
Navigation menu: Enter
coordinates
You can also enter a destination via
geographic coordinates.
> Press
NAVIGATIONAL MODE
key in the route planning
Start
menu.
key again to start naviga-
tion.
Enter coordinates
navigation menu.
>>>
> EN
in the
55