Navigation Menu: Select On Map - Becker TRAFFIC ASSIST 7977 Instructions For Use Manual

You will find information about working
with the entry menu in the "Entries made
with the entry menu" on page 31 chapter.
You will find information about scrolling
in lists in the "Scrolling through the lists"
on page 32 chapter.
Note:
The Category boxes do not have to
be completed. These are only used
to restrict the list of points of interest.
In large towns, this list may be very long.
Operating options in the POI input
menu
Following selection of a POI, the follow-
ing options are available using the buttons
on the right-hand area of the screen:
• Display POIs on the map using the
button.
map
• Set the options for the driving profile
using the button.
Options
• Save the POI in the destination memo-
ry using the button.
Save
• Start route guidance directly to the POI
using the button.
Start
You can also display information regard-
ing the selected POI.
> Press the
button for this purpose.
Note:
The button can only be selected if infor-
mation is actually available.
The available information on the selected
In
POI is displayed (exact address and phone
number if available).
NAVIGATIONAL MODE
Navigation menu: Select on
map
If the destination required cannot yet
or can no longer be found in the destina-
tions memory, the
Select on map
allows you to select it directly.
No address details are asked for in this
case.
> Press the
key to make a
Select on map
direct selection.
The map display appears.
Note:
You may have to enlarge the area using
the zoom buttons and
find the desired street. You can also find
the desired point by moving the map
>>>
> EN
button
in order to
51