Canceling Navigation - Becker TRAFFIC ASSIST 7977 Instructions For Use Manual

>>> NAVIGATIONAL MODE
Saving destination
The button opens an entry menu for
> EN
Save
entering a name for the destination en-
tered. If a name has been entered and
adopted using
transferred to rapid access and protected
there. The entry menu allows you to
change between upper and lower case let-
ters.
Starting navigation
The button can be used to start nav-
Start
igation straight away. All the data entered
so far are processed in the route calcula-
tion.
> Press the
Start
The route is calculated. The map display
then appears and directions to the destina-
tion begin.
48
Note:
If no GPS signal is available at the time of
route calculation, the following display
appears.
, the destination is
OK
If the GPS signal is available, route calcu-
lation is started automatically.
A short route to the selected destination
is displayed when
key to start navigation.
A demonstration video is shown by press-
ing
is pressed.
Simulation
.
Demo

Canceling navigation

> Press the key .
> Press the key to confirm that you
Yes
want to stop.