Installation And Connection Instructions; Safety Information For The Installation - AEG FAVORIT 43470 I User Information

INSTALLATION AND CONNECTION
INSTRUCTIONS

Safety information for the installation

• Only transport the dishwasher in an upright position, otherwise salt
water may run out.
• Before using the dishwasher for the first time, check for any damage
caused in transport. Do not under any circumstances connect an
appliance that is damaged. In the case of damage, please contact
your supplier.
• Never use the dishwasher if the mains cable, water inlet or drain
hose are damaged; or if the control panel, work top or plinth area
are damaged such that the inside of the appliance is freely
accessible.
• Always plug the mains plug into a correctly installed shockproof
socket.
• Permanent connection: a permanent connection must only be
installed by a trained electrician.
• Prior to using the appliance for the first time, ensure that the rated
voltage and type of supply on the rating plate match that of the
supply where the appliance is to be installed. The fuse rating is also
to be found on the rating plate.
• Multi-way plugs / connectors and extension cables must not be used.
This could constitute a fire hazard through overheating.
• The dishwasher's cable must only be replaced by your local Service
Force Centre or a trained specialist technician.
• A water inlet hose with safety valve must only be replaced by your
local Service Force Centre.
• Do not use, for connection, old hoses which have been used in
another appliance.

Installation and connection instructions

27