Operating Instructions; Cooling The Freezer First; Features; Cold Control Knob - Kenmore Elite Owner's Manual

OPERATING INSTRUCTIONS

Cooling the Freezer First

After plugging the freezer in, it must run for 3 hours in
order to cool before placing any food inside. Make sure
the cold control knob is set at "4" (Factory Settings).
NOTE: Freezers without a cold control knob are preset at
position 4 at the factory and cannot be adjusted.
When the freezer is first started, the compressor will run
constantly until the cabinet is cold. After the cabinet is
cooled the compressor will cycle on and off as needed to
keep the freezer at the set temperature.
The outside of your freezer may feel warm. This is
normal. The freezer's design and main function is to
remove heat from packages and air space inside the freezer.
This heat is transferred to the room air through the outside
walls of the freezer so they usually feel warm to the touch.

FEATURES

The features described below are not incorporated on all
FREEZERS. It is important that you familiarize yourself
with the features present on your freezer.
Cold Control Knob (Some Models)
The cold control knob is located at the lower right hand
side of the cabinet.
NOTE: Freezers without a cold control knob are preset at
the factory and cannot be adjusted.
The cold control knob has been preset at the factory at the
standard operating temperature (position 4). The freezer
temperature may be adjusted by setting the cold control
knob from number 1 (warmest) to number 7 (coldest). Setting
the cold control knob at the number "0" where it clicks will
switch off power to the compressor.
NOTE: When the cold control knob is set at position "0"
the temperature in the freezer will rise to room
temperature and the freezer contents will defrost.
Setting the cold control knob to number "0" position
(Off) does not remove power to the freezer. Do not
attempt to do any cleaning, repairs or defrost the freezer
without first unplugging the freezer first.
Temperature Monitor Alarm (Some Models)
Some models feature a temperature monitor that provides an
audible alarm. The temperature monitor alarm is located
below the temperature control. The alarm sounds if the
temperature in the freezer rises 10° or more above normal for
selected setting. Alarm may sound if the temperature control
dial is turned to a much lower/colder setting or if a large
amount of unfrozen food is added at one time. Alarm is
controlled by a three position switch.
· 0 or OFF prevents alarm from sounding when freezer is warm,
such as during initial start-up or defrosting.
· ✓ ✓ ✓ ✓ ✓ or TEST sounds alarm regardless of temperature. Alarm
system should be tested at least once a month.
· 1 or ON is proper setting for normal freezer use. Return switch
to 1 after defrosting.
LIGHTS (Some Models)
Interior Light (Some Models)
The interior light is located on the inside of the freezer lid.
The light turns on when the lid is opened and turns off
when the lid is closed. Replacement bulbs may be
obtained through your nearest Sears parts department.
Power Light (Some Models)
The power light is amber in color and is located on the
handle of the freezer. The purpose of the power warning
light is to warn you when there is an interruption in power
to the freezer. When the power light is on, the freezer is
receiving electrical power. If the light is off, there is an
absence of power to the freezer (due to blown fuse, tripped
circuit breaker, loose power cord, etc.) This light does not
guarantee a sufficiently cold temperature inside.
IMPORTANT: The power light indicates electrical power
only. It does not indicate that there is a sufficiently cold
temperature inside the freezer.
- 7 -
Lock
Power Light