Tail/Brake Light; Replacing A Turn Signal Light Bulb; License Plate Light - Yamaha MidnightStar XV1900A Owner's Manual

Tail/brake light

This model is equipped with an LED-
type tail/brake light.
If the tail/brake light does not come on,
have a Yamaha dealer check it.
PERIODIC MAINTENANCE AND ADJUSTMENT
EAU24181
Replacing a turn signal light
bulb
1. Remove the turn signal light lens
by removing the screw, and then
turning the lens counterclockwise.
1
2
1. Turn signal light lens
2. Screw
2. Remove the burnt-out bulb by
pushing it in and turning it counter-
clockwise.
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by turning it clock-
wise, and then installing the screw.
NOTICE: Do not overtighten the
screw, otherwise the lens may
break.
[ECA11191]
EAU38382

License plate light

If the license plate light does not come
on, have a Yamaha dealer check the
electrical circuit or replace the bulb.
6-29
EAU24330
6