Yamaha MidnightStar XV1900A Owner's Manual page 24

INSTRUMENT AND CONTROL FUNCTIONS
key and both standard keys to a
Yamaha dealer and have the stan-
dard keys re-registered.
NOTICE
If the display indicates an error
code, the vehicle should be checked
as soon as possible in order to avoid
3
engine damage.
Brightness control mode
1. Multi-function meter unit panel
2. LCD
3. Speedometer needle
4. Tachometer needle
5. Fuel gauge needle
The brightness can be adjusted for the
following:
●
the multi-function meter unit panel
(item number "1")
● the LCD (item number "2")
● the speedometer, tachometer, and
ECA11590
the fuel gauge needles (item num-
ber "3")
Select the brightness control mode as
follows.
1. Turn the key to "OFF".
2. Push and hold the "SELECT"
switch.
3. Turn the key to "ON", and then re-
lease the "SELECT" switch after
five seconds.
Item number "1" is displayed.
1. Multi-function meter unit panel
2. Item number "1"
3. Brightness level display
4. Adjust the multi-function meter unit
5. Push the "SELECT" switch to se-
1. LCD
2. Item number "2"
3. Brightness level display
6. Push the "SELECT" switch to se-
3-9
panel brightness level by pushing
the reset switch.
lect the LCD.
Item number "2" is displayed.
Adjust the LCD brightness level by
pushing the reset switch.
lect the speedometer, tachometer,
and the fuel gauge needles.
Item number "3" is displayed.
Adjust the brightness level of the
speedometer, tachometer, and the
fuel gauge needles by pushing the
reset switch.