Yamaha Super Tenere XTZ1200Z Owner's Manual page 25

Odometer and tripmeter modes
2
1. Odometer/tripmeter/fuel reserve tripmeter
2. Left set button
Pushing the left button switches the dis-
play between the odometer mode
"ODO" and the tripmeter modes "TRIP
1" and "TRIP 2" in the following order:
ODO → TRIP 1 → TRIP 2 → ODO
TIP
When selecting "TRIP 1" or "TRIP 2",
the display flashes for five seconds.
When approximately 3.9 L (1.03 US
gal, 0.86 Imp.gal) of fuel remains in the
fuel tank, the display automatically
changes to the fuel reserve tripmeter
mode "TRIP F" and starts counting the
distance traveled from that point. In that
case, pushing the left button switches
INSTRUMENT AND CONTROL FUNCTIONS
the display between the various tripme-
ter and odometer modes in the follow-
ing order:
TRIP F → ODO → TRIP 1 → TRIP 2 →
TRIP F
1
TIP
When selecting "TRIP 1", "TRIP 2" or
"TRIP F", the display flashes for five
seconds.
To reset a tripmeter, select it by push-
ing the left button, and then push this
button for at least one second while the
display is flashing. If you do not reset
the fuel reserve tripmeter manually, it
resets itself automatically and the dis-
play returns to the prior mode after re-
fueling and traveling 5 km (3 mi).
3-10
Clock
3 2
1. Clock
2. Right set button
3. Left set button
The clock displays when the key is
turned to "ON". In addition, the clock
can be displayed for 10 seconds by
pushing the left button when the main
switch is in the "OFF", "LOCK" or "
position.
To set the clock
1. Push the left button and right but-
ton together for at least three sec-
onds.
2. When the hour digits start flashing,
push the right button to set the
hours.
1
3
"