Yamaha Super Tenere XTZ1200Z Owner's Manual page 87

1 7
2
8
3
9
4
10
5
11
6
13
12
1. Headlight fuse
2. ABS solenoid fuse
3. Electronic throttle valve fuse
4. Fuel injection system fuse
5. Backup fuse (for clock and immobilizer sys-
tem)
6. Radiator fan fuse
7. Ignition fuse
8. Signaling system fuse
9. ABS control unit fuse
10.Auxiliary DC jack fuse
11.Taillight fuse
12.O/P (option) fuse
13.Spare fuse
If a fuse is blown, replace it as follows.
1. Turn the key to "OFF" and turn off
the electrical circuit in question.
2. Remove the blown fuse, and then
install a new fuse of the specified
amperage. WARNING! Do not
PERIODIC MAINTENANCE AND ADJUSTMENT
use a fuse of a higher amperage
rating than recommended to
avoid causing extensive dam-
age to the electrical system and
possibly a fire.
13
[EWA15131]
3. Turn the key to "ON" and turn on
6-30
Specified fuses:
Main fuse:
50.0 A
Headlight fuse:
20.0 A
Taillight fuse:
7.5 A
Signaling system fuse:
10.0 A
Ignition fuse:
20.0 A
Radiator fan fuse:
20.0 A
Backup fuse:
7.5 A
Electronic throttle valve fuse:
7.5 A
Fuel injection system fuse:
10.0 A
ABS solenoid fuse:
20.0 A
ABS control unit fuse:
7.5 A
Auxiliary DC jack fuse:
3.0 A
ABS motor fuse:
30.0 A
O/P (option) fuse:
20.0 A
the electrical circuit in question to
check if the device operates.
6