Yamaha TZ250N1/(N) Owner's Manual page 88

REAR SHOCK ABSORBER COMPRESSION DAMPING
FORCE ADJUSTMENT
NOTE:
Fully turn in the adjuster and then turn it out.
Specify the position in which the first click is
heard as the zero position. If a click is heard
just when the adjuster is fully turned in, this
position is zero.
C C CAUTION:
Do not force the adjuster past the minimum
or maximum extent of adjustment. The
adjuster may be damaged.
EC36P040
REAR SHOCK ABSORBER COMPRESSION
DAMPING FORCE ADJUSTMENT
1. Adjust:
• Compression damping force
By turning the adjuster 1.
Stiffer a ≥ Increase the compression
damping force. (Turn the
adjuster 1 in.)
Softer b ≥ Decrease the compression
damping force. (Turn the
adjuster 1 out.)
]
Extent of adjustment:
Maximum
Fully turned-in
position
• STANDARD POSITION:
a
This is the position which is back by the spe-
cific number of clicks from the fully turned-in
position.
Standard position:
12 clicks out
NOTE:
Fully turn in the adjuster and then turn it out.
Specify the position in which the first click is
heard as the zero position. If a click is heard
just when the adjuster is fully turned in, this
position is zero.
C C CAUTION:
Do not force the adjuster past the minimum
or maximum extent of adjustment. The
adjuster may be damaged.
3-35
INSP
ADJ
Minimum
Fully turned-out
position