Replacing The Tail/Brake Light Bulb - Yamaha TDM850 Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
1. Do not touch this area.
CAUTION:
_
Do not touch the glass part of the
headlight bulb to keep it free from
6
oil, otherwise the transparency of
the glass, the luminosity of the bulb,
and the bulb life will be adversely af-
fected. Thoroughly clean off any dirt
and fingerprints on the headlight
bulb using a cloth moistened with
alcohol or thinner.
_
4. Connect the headlight couplers,
and then install the bulb cover.
5. Have a Yamaha dealer adjust the
headlight beam if necessary.
1. Screw ( 2)
2. Tail/brake light lens
EC000105
Replacing the tail/brake light
bulb
1. Remove the tail/brake light lens by
removing the screws.
2. Remove the defective bulb by
pushing it in and turning it counter-
clockwise.
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screws.
6-37
1. Tail/brake light bulb ( 2)
EAU01623
CAUTION:
@
Do not overtighten the screws, oth-
erwise the lens may break.
@
EC000108