To Change Engine Oil - Yamaha FZS1000 Owner's Manual

2004
Hide thumbs Also See for FZS1000:
Table of Contents

Advertisement

PERIODIC MAINTENANCE AND MINOR REPAIR
NOTE:
The engine oil should be between the
minimum and maximum level marks.
1. Engine oil filler cap
2. Engine oil level check window
6
3. Maximum level mark
4. Minimum level mark
4. If the engine oil is below the mini-
mum level mark, add sufficient oil
of the recommended type to raise
it to the correct level.
To change the engine oil (with or
without oil filter cartridge replace-
ment)
1. Start the engine, warm it up for
several minutes, and then turn it
off.
2. Place an oil pan under the engine
to collect the used oil.
3. Remove the engine oil filler cap
and drain bolt to drain the oil from
the crankcase.
1. Engine oil drain bolt
NOTE:
G
Skip steps 4–6 if the oil filter car-
tridge is not being replaced.
G
When draining the engine oil, use
a funnel or similar device to keep
the oil away from the exhaust pipe.
4. Remove the oil filter cartridge with
an oil filter wrench.
6-9
1. Oil filter wrench
2. Oil filter cartridge
NOTE:
An oil filter wrench is available at a
Yamaha dealer.
5. Apply a thin coat of engine oil to
the O-ring of the new oil filter car-
tridge.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fzs1000s

Table of Contents