Table of Contents
Advertisement
Cleaning and Maintenance
Aluminium
Carry out daily cleaning with a well
wrung-out cloth. For more stubborn
soiling, use a cloth or a soft plastic
sponge together with washing-up
liquid or all-purpose cleaner.
Never use metal cleaning pads,
metal wool, hard plastic sponges,
scouring powder, soft soap or other
abrasive or caustic cleaning agents.
Ceramic hob
Immediately scrape off any sugar or
sugary food stains (jam, juice etc.),
melted plastic and aluminium foil
from the hot plate. If the plate cools
before these materials have been
removed it may become damaged. A
stained plate reduces the heat trans-
fer between cooking zone and pan.
Dry off cooking zones with a damp
cloth with washing-up liquid. When
heavily stained you can do the fol-
lowing:
1. Remove stains etc. using the
ceramic hob scraper.
2. Make sure the ceramic hob has
cooled down. Use the cleaning
liquid supplied with the hob.
Follow the instructions on the
cleaning liquid.
3. Wipe the plate with a damp cloth
or kitchen paper. Stubborn stains
are removed by rubbing hard on
the stain with a cleaning liquid on
paper towel.
4. Using a damp cloth wipe off any
excess cleaning liquid
5. Wipe with a dry cloth.
Make sure that the ceramic hob is
dry when heated. A damp surface
can develop rainbow-like stripes
when heated.
22
Both cooking zones can be set
simultaneously with two different
timings. When both cooking zones
have a setting the time for the indi-
vidual cooking zone is read in the
following way:
The time in the display belongs to
the cooking zone for which the con-
A
trol lamp is lit. Push
to see the
time for the other cooking zone.
When the set time has passed you
will hear an acoustic signal. The
timer and the cooking zones are
automatically turned off.
The control lamp for the other cook-
ing zone will flash while the first
timer is activated. When the time for
the first zone expires the remaining
time for the other cooking zone is
shown in the display.
De-activating the Timer
If you wish to de-activate the timer
before the time is up you have to do
l m
the following. Push the
keys for 3 seconds. In the display it
will say "0". After a few seconds the
display will turn off.
19
Advertisement
Table of Contents
