Yamaha Thundercat YZF600R Owner's Manual page 39

ITEM
Throttle grip
Control cables
Drive chain
Wheels and tires
Brake and shift pedals
Brake and clutch levers
Sidestand
Chassis fasteners
Instruments, lights, signals
and switches
Sidestand switch
Air intake duct
• Make sure that operation is smooth.
• Check free play.
• If necessary, have Yamaha dealer make adjustment or lubricate.
• Make sure that operation is smooth.
• Lubricate if necessary.
• Check chain slack.
• Adjust if necessary.
• Check chain condition.
• Lubricate if necessary.
• Check for damage.
• Check tire condition and tread depth.
• Check air pressure.
• Correct if necessary.
• Make sure that operation is smooth.
• Lubricate pedal pivoting points if necessary.
• Make sure that operation is smooth.
• Lubricate lever pivoting points if necessary.
• Make sure that operation is smooth.
• Lubricate pivot if necessary.
• Make sure that all nuts, bolts and screws are properly tightened.
• Tighten if necessary.
• Check operation.
• Correct if necessary.
• Check operation of ignition circuit cut-off system.
• If system is defective, have Yamaha dealer check vehicle.
• Check that the screen is not clogged.
• Clean if necessary.
PRE-OPERATION CHECKS
CHECKS
4-2
PAGE
6-20
6-31
6-29, 6-30
4
6-21–6-24
6-31
6-32
6-32
—
—
3-18
6-19