Seat - Yamaha DT125R Owner's Manual

To unlock the steering
1. Open the steering lock cover,
and then insert the key.
2. Push the key in, turn it 1/8 turn
counterclockwise so
moves out, and then release it.
3. Remove the key, and then close
the lock cover.
INSTRUMENT AND CONTROL FUNCTIONS
that it
1. Bolt (×2)

Seat

To remove the seat
1. Remove panels A and B. (See
page 6-8 for panel removal and
installation procedures.)
2. Remove the bolts and pull the
seat off.
1
1. Projection (×2)
2. Holder (×2)
EAU01648
To install the seat
NOTE:
Make sure that the seat is properly
secured before riding.
3-11
1
2
1. Insert the projections on the front
of the seat into the seat holders
as shown.
2. Place the seat in the original
position, and then tighten the
bolts.
3. Install the panels.
3