Instrument And Control Functions; Main Switch; Indicator And Warning Lights - Yamaha DT125R Owner's Manual

EAU00027
ON
OFF

Main switch

The main switch controls the ignition
and lighting systems. The various
main switch positions are described
below.
ON
All electrical systems are supplied
with power, and the engine can be
started. The key cannot be removed.
OFF
All electrical systems are off. The key
can be removed.

INSTRUMENT AND CONTROL FUNCTIONS

1 2 3
1. Turn signal indicator light "5"
2. High beam indicator light "&"
EAU00028
3. Neutral indicator light "N"
4. 2-stroke engine oil level warning
light " "
7

Indicator and warning lights

EAU00036
Turn signal indicator light "5"
This indicator light flashes when the
turn signal switch is pushed to the left
or right.
EAU00038
High beam indicator light "&"
This indicator light comes on when
the high beam of the headlight is
switched on.
Neutral indicator light "N"
This indicator light comes on when
4
the transmission is in the neutral
position.
2-stroke engine oil level warning
light "
This warning light comes on when
the 2-stroke engine oil level is low.
The electrical circuit of the warning
light can be checked according to the
EAU03034
following procedure.
1. Turn the key to "ON".
2. Shift the transmission into the
EAU00057
3. If the warning light does not
NOTE:
EAU00063
Even if the 2-stroke engine oil level is
sufficient, the warning light may flick-
er when riding on a slope or during
sudden acceleration or deceleration,
but this is not a malfunction.
3-1
"
7
neutral position.
come on, have a Yamaha dealer
check the electrical circuit.
EAU00061
EAU04258
3