Shift Pedal; Brake Lever; Brake Pedal - Yamaha Bulldog BT1100 Owner's Manual

EAU00027
1

1. Shift pedal

Shift pedal
The shift pedal is located on the left side of
the engine and is used in combination with
the clutch lever when shifting the gears of
the 5-speed constant-mesh transmission
equipped on this motorcycle.
INSTRUMENT AND CONTROL FUNCTIONS
1 2

1. Brake lever

2. Position adjusting dial
3. Arrow mark
EAU00157
Brake lever
The brake lever is located at the right han-
dlebar grip. To apply the front brake, pull
the lever toward the handlebar grip.
The brake lever is equipped with a position
adjusting dial. To adjust the distance be-
tween the brake lever and the handlebar
grip, turn the adjusting dial while holding
the lever pushed away from the handlebar
grip. Make sure that the appropriate set-
ting on the adjusting dial is aligned with the
arrow mark on the brake lever.
3

1. Brake pedal

EAU00161
Brake pedal
The brake pedal is on the right side of the
motorcycle. To apply the rear brake, press
down on the brake pedal.
3-10
3
1
EAU00162