Yamaha Bulldog BT1100 Owner's Manual page 18

INSTRUMENT AND CONTROL FUNCTIONS
To reset the periodic maintenance and lu-
brication indicator:
B
1. Turn the key to "
2. Push the "RESET" button and hold it
down while turning the key to "
(ON).
3
Clock mode
NOTE:
" (OFF).
The clock can only be set while the
speedometer unit is in the odometer
I
mode.
"
To set the clock:
1. Turn the key to "
2. Push the "RESET" button and "SET"
button together for at least two sec-
onds.
3. When the hour digits start flashing,
push the "RESET" button to set the
hours (between 1 and 12).
4. Push the "SET" button, and the first of
5. Push the "RESET" button to set the
6. Push the "SET" button, and the sec-
I
" (ON).
7. Push the "RESET" button to set the
8. Push the "SET" button, and then re-
3-5
the two minute digits will start flash-
ing.
first minute digit (between 0 and 5).
ond of the two minute digits will start
flashing.
second minute digit (between 0 and 9).
lease it to start the clock.
EAU00027