Seat - Yamaha Bulldog BT1100 Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
CAUTION:
Do not use the starter (choke) for more
than 3 minutes as the exeaust pipe may
discolor from excessive heat. In addi-
tion, extended use of the starter
(choke) will cause afterburning. If this
occurs, turn off the starter (choke).
3
ECA00038
1. Open

Seat

To remove the seat
1. Insert the key into the seat lock, and
then turn it clockwise.
2. Pull the seat off.
1
1. Projection
2. Seat holder
EAU01726
To install the seat
1. Insert the projections on the front of
2. Push the rear of the seat down to lock
3. Remove the key.
NOTE:
Make sure that the seat is properly
secured before riding.
3-13
the seat into the seat holders as
shown.
it in place.
EAU00027