Table of Contents
Advertisement
Installing more than one Frontline hob
Additional parts: connecting cross bar(s), heat-resistant silicon, rubber
block, razor blade
3
Only use special heat-resistant silicon.
Cut-out section
Distance from the wall: at least 50 mm
Depth: 490 mm
Width: The widths of all appliances to be built-in are added together,
minus 20 mm (see also "Overview of all appliance widths")
Example:
Installation of more than one appliance
1. Calculate the size of the cut-out section and saw it out.
2. Remove Frontline strip from the appliances by hand (magnetic fasten-
ing).
3. Lay the appliances one at a time on something soft (for example a
blanket) with the underside facing upwards.
4. Screw fixing plates into the appropriate holes in the protective boxes.
29
Advertisement
Table of Contents
