Instructions For Installation And Electrical Connection; Safety Instructions - AEG LAVAMAT 60 Instruction Booklet

Instructions for installation and electrical connection

Safety instructions for the installer
• This appliance is heavy, care should be taken when moving it.
• When unpacking the appliance, check that it is not damaged. If in
doubt, do not use it and contact the retailer.
• All internal packing must be removed before using the appliance.
Serious damage may be caused to the machine or adjacent furniture
if the protective transit devices are not completely removed. Refer to
the relevant paragraph.
• Any electrical work required to install this appliance must be carried
out by a qualified electrician.
• Any plumbing work required to install this appliance must be carried
out by a qualified plumber.
• After installing the machine, check that it is not standing on its elec-
trical supply cable.
• If the appliance is placed on a carpeted floor, ensure that air can cir-
culate freely between the adjustable feet and the floor.
• The installation should comply with local water authority and build-
ing regulation requirements.
• Should the appliance power supply cable need to be replaced, this
should be carried out by our Service Centre.
• Appliances designed for cold water connection must not be connect-
ed to hot water.
32