Table of Contents
Advertisement
M
K
7
3
L
E
-
N
/
M
M
K
7
3
L
E
-
N
/
M
Installing driver procedure on Microsoft Windows NT :
-----------------------------------------------------
1. In the Main group of NT, select the "Control Panel" icon.
2. Choose the "Network" icon in the Control Panel window.
3. In the Network Settings dialog box, choose the "Add Adapter" button.
The Add Network Adapter dialog box will appear.
4. Select "<other> Requires disk from manufacturer", and press <Enter> from the list of network cards.
5. Enter drive and pathname
[CD-ROM]:\Driver\LAN\RTL8100\Windows\WinNT4 (for NT 4.0) to locate OEMSETUP.INF, and press OK button.
6. "Select Line Speed" dialog box will pop up. Set the default value to "auto". The other values, such as "10" or "100", are only
used when you want to force RTL8139 PCI Fast Ethernet controller to 10Mb or 100Mb.
7. Then "Input EthernetID" dialog box will pop up. This option is only required when you have more than one Realtek RTL8139
PCI Fast Ethernet adapters on this computer. Select "SKIP" if only one adapter is installed on this computer.
8. "Bus Location" will be shown in next screen. Your machine contains more than one hardware bus; please select the Bus Type
and Bus number on which your network adapter card is installed.
9. NT will then perform the binding process. If any additional network software options were installed, you may be prompted for
specific information for these packages.
10. Restarting your system and you will acquire network service.
K
7
3
L
E
-
V
K
7
3
L
E
-
V
70
O
n
l
i
n
e
M
a
n
u
a
l
O
n
l
i
n
e
M
a
n
u
a
l
Advertisement
Table of Contents
