Table of Contents
Advertisement
54
Cleaning and care
Pyrolytic cleaning
Warning: During this process the oven gets extremely hot. Keep small children
away.
Important Before carrying out the Pyroluxe process, all removable parts, includ-
ing the side rails, must be removed from the oven.
If you use the oven shelf runners that are available as special accessories, these
must be removed before pyrolytic cleaning.
If the side rails or oven shelf runners are still in place, 'C1' appears in the clock
display.
The pyrolytic cleaning process then cannot be started due to a safety cut-out
that protects the side rails/oven shelf runners.
If 'C3' appears in the clock display, pyrolytic cleaning does not start. Close the
oven door properly.
Pyrolytic cleaning
1. First remove the worst of the residue manually.
2. Select oven function Pyroluxe
– P2 appears in the temperature display.
– "2:45" appears in the clock display
– Cook time flashes for approx. 5 seconds
Pyrolytic cleaning then starts.
Do not open the oven door during the heating up time, or the process is can-
celled.
The Light does not work.
When a pre-set temperature is reached, the oven door is locked.
The symbol
is unlocked again.
If the process is interrupted while the door is locked, only pyrolytic cleaning can
be selected as the next function. This only applies while the oven door is locked.
.
is active and the bars of the heat indicator are lit until the door
Advertisement
Table of Contents
