SCM Microsystems DAZZLE User Manual page 19

USER'S MANUAL
USER'S MANUAL
16.
OnDVD will begin the installation
operation displaying a status box as
shown on left.
17.
Click "Finish" to restart your computer.
INSTALLATION NOTE: If you
attempt to attach the reader's cable to
the USB port of your PC or hub prior to
installing the drivers, you may receive a
message similar to the one shown on
left.
Click Finish
If this occurs, click "Cancel", install the
driver software from the CD-ROM, and
then connect the reader. For more
information on attaching USB devices,
proceed to the section "Connecting to
the USB Port" (page 23) or
"Connecting to a USB Hub" (page 24).
Congratulations! The installation is now
complete. You may connect the Dazzle
Card Reader to your computer after
restarting. Proceed to "Connecting to a
USB Port" , or, "Connecting to a USB
Hub" respectively for information on
connecting your card reader.
19