Table of Contents
Advertisement
USER'S MANUAL
USER'S MANUAL
Connecting to a USB Hub
1.
Connect the USB hub (purchased separately) to the USB port on your Macintosh.
NOTE: Use only with a powered USB hub.
2.
Then connect the USB connector of the Dazzle Card Reader to a port on the
USB hub.
NOTE: The card reader may be plugged into the computer or hub while the computer is
running.
3.
Make sure the cable ends are firmly connected. Be careful not to confuse the upper
and lower parts of the connector. Do not force connections, as this may damage the
computer or the Dazzle Card Reader.
Enlarged view
Attach the USB connector from
the reader to an available port on the
USB hub.
12
Enlarged view
Attach the USB connector from the USB hub
to the USB port on your computer
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the DAZZLE and is the answer not in the manual?
Questions and answers