Sony SCD-XA5400ES Service Manual page 5

HOW TO OPEN THE TRAY WHEN POWER SWITCH TURNS OFF
Pull out the tray
in the direction of arrow
MAIN BOARD SERVICE POSITION
In checking the MAIN board, prepare jig (extension cable J-2501-102-A: 1 mm Pitch, 13 cores, Length 300 mm).
insulator sheet
Note: insert the insulator sheet to prevent short.
PRECAUTION WHEN REMOVING OPTICAL PICK-UP BLOCK OR DMB-FIT BOARD
CAUTION
Be sure to execute a solder bridge as a measure against
static electricity when removing the optical pick-up or
DMB-FIT board.
(Otherwise, the OP block will be destroyed.)
.
Rotate the cam (66)
with a tapering driver
in the direction of arrow
AUDIO board
(CN151)
MAIN board
(CN1100)
mechanism deck
SCD-XA5400ES
– BOTTOM VIEW –
cam (66)
.
connect jig (extension cable J-2501-102-A) to
MAIN board (CN501, CN1100) and
AUDIO board (CN151, CN152).
AUDIO board
(CN152)
MAIN board
(CN501)
– BOTTOM VIEW –
5