Before You Start; System Requirement - Repotec RP-WR1134 User Manual

1: Introduction
The Wireless Access Point Router combines the technology of Fast Ethernet and IEEE
802.11b Wireless LAN, providing the home or small office users the Cable/DSL access
to the Internet via cord and cordless connection. At the same time, integrated with the
firewall and 128-bit WEP (Wired Equivalent Privacy) Encryption, the Wireless Access
Point Router allows multiple users to share one Internet connection while ensuring the
safety and security of the packet flow.
Throughout this guide, the Wireless Access Point Router may be referred to as the
Router.

1.1 Before You Start

Check the package of the router before you start. The package contents come with:
One Wireless Access Point Router
One AC/DC Power Adapter
CD
- User Guide

1.2 System Requirement

Before you getting started, make sure you meet the following requirements.
One RJ-45 Cable/DSL network connection
One PC with installed 10/100 Mbps Ethernet Adapter
UTP network cable with RJ-45 connector
Windows 95/98/2000 or Windows NT for the Web-based Configuration
Either Microsoft Internet Explorer 4.0 (or above version) or Netscape Navigator 4.0
(or above version)
For Wireless Connection
One PC with installed Wireless Network Adapter
Wireless Acccess Point Router
6