Table of Contents
Advertisement
Before you start to configure other PCs to accept the IP address that your Router will
provide, make sure the network card or adapter has been successfully installed into
each PC you planed to connect to the Router. Complete the following steps to
configure your PC:
Step 1 Click the Start button, select Setting, then Control Panel.
Step 2 Double Click the Network and Dial-up icon.
Step 3 Highlight the Local Area Connection and click the button of Properties.
Step 4 In the Configuration window, select the TCP/IP protocol line that has been
associated with your network card or adapter. (See Figure 3-36)
Step 5 Click Properties button, then choose IP Address tab. Select Obtain an IP
address automatically. Press OK. You have completed the client settings.
Wireless Acccess Point Router
Figure 3-36 Network Box Screen
45
Advertisement
Table of Contents
