Table of Contents
Advertisement
Wireless Acccess Point Router
Note: If you have completed the basic configuration of the router, you may refer to
Section 3.6 Configuring your PCs to Connect to the Router to configure the PCs that
you plan to connect to the Router.
3.2 The Setup Wizard
Figure 3-3 shows the page that you will see once you have accessed to the Utility. The
Setup Wizard of the router will lead you step by step to configure your Router. Please
follow the instructions as the Wizard page request and change the settings in
accordance to the information provided by your ISP.
If you use ADSL modem to make Cable/DSL access, please go to 3.2.1 PPPoE
Connection for WAN. If the fixed IP is used, please go to 3.2.2 Fixed IP for WAN. As for
the Cable modem, please go to 3.2.4 Dynamic IP for WAN.
Figure 3-3 The "Home" page of the Utility Menu Screen
15
Advertisement
Table of Contents
