Akai QX-5570UF Operator's Manual page 18

ENTERING A PROGRAM
1. Press the PROGRAM/Clock-Dispaly button. "PROG" appears
and the following information will be display on the display:
2. Select the first desired track using the Forward
Skip Buttons.
3. Press the PROGRAM/Clock-Dispaly button. The first program
selection is now stored in the program memory. The display
will now show:
4. Select the next desired track using the Forward
Reverse Skip Buttons.
5. Press the PROGRAM/Clock-Dispaly button. Continue entering tracks in this way until
all the desired tracks are stored (up to 64 tracks).
PROGRAMMED DISC PLAY (FOR MP3 ONLY)
• It is possible to program the tracks you wish to play in a sequence of your choice. It
is not possible to enter program a disc during playback. Press the Stop
then follow the instructions below.
• It is easier to use the remote control for the following settings, however, you may also
use the controls on the main unit if desired.
ENTERING A PROGRAM
1. Press the PROGRAM/Clock-Dispaly button. "PROG" appears and the following
information will be display on the display. The "album No" will flashing.
2. Select the first desired album using the Forward
Reverse Skip Buttons.
3. Press the PROGRAM/Clock-Dispaly button change to select
the first desired track using the Forward
Skip Buttons.
4. Press the PROGRAM/Clock-Dispaly button. The first program selection is now stored
in the program memory. The display will now show.
5. Repeat Step 2-3.
6. Press the PROGRAM/Clock-Dispaly button. Continue entering tracks in this way until
all the desired tracks are stored (up to 64 tracks).
and Reverse
and
and
and Reverse
GB 67
button first,