Table of Contents
Advertisement
C. Another source connection
This unit can play Dolby Digital, but only in two channels.
Analogue connection
Right side of unit
Digital connection
Audio equipment with
digital audio input jack
Listening to another audio equipment
1. Turn on the Unit.
2. Turn on your audio equipment and follow the instructions included with it to select the AUDIO IN or DIGITAL IN
function.
Notes:
• If the external equipment is a television and this audio system is closed to it, you may experience interference
if the tuner function is selected while the television is working.
• Make sure to use correct Audio/Video cable, wrong plug connection may cause weak signal.
• If you have a stereo VCR, make sure you set it in stereo mode.
• Due to copyright protection, DVD movies cannot be copied. If you copy a DVD movie onto a videotape, the
resulting copy will be unclear, with poor sound quality. This is NOT caused by a defective DVD system.
CONNECTING OTHER EQUIPMENT
AUDIO/VIDEO CABLE
COAXIAL DIGITAL AUDIO CABLE
(No need to connect
the Yellow video plug)
(Red)
(White)
Rear side of unit
E - 11
Amplifier of
stereo system, etc.
AUDIO
IN
DIGITAL
OUT
Advertisement
Table of Contents
