Software Installation - LevelOne FCS-1040 User Manual

Software installation

The following are steps for the software installation.
Note:
The default user name is root.
The default password is the MAC address of your own FCS-1040, which marks
at the bottom label of each device.
Please enter the MAC address with capital letters.
STEP 1 Put the Installation disk into the CD-ROM drive, and the installation should
start automatically. If the installation does not start, click on "Start" on the lower left
corner of your screen, open "My Computer" and double click on the CD-ROM icon. The
Installation Wizard Installation Window will appear.
- 10 -