Vivitar DVR 820HD Owner's Manual page 28

2. Press the OK/Joystick button to open the Date Stamp submenu.
3. Push the OK/Joystick button to the Right/Left/Up/Down to highlight
and select the Date Stamp option icon you desire:
Disable
4. If you select Disable, no date/time will appear on the photo after it is
captured.
5. To set the Date and Time, select the Enable option and press the
OK/Joystick button to open the submenu.
6. Push the OK/Joystick button to the Left/Right to highlight and select the
Year, Month, Day, 24H, Hour and Minutes options you desire to
change if you have not yet set the Date and Time as explained in the
Setup mode.
7. Push the OK/Joystick button Up/Down to change the digits for each of
the date or time options you desire to update.
8. Press the OK/Joystick button to save the date and time you selected
and exit to the Setting menu.
9. Press the MENU button to revert back to the Photo capture mode.
10. Press the Capture button to capture photos with date and time
stamps appearing on the photos when viewing the photos in Playback
mode or when downloaded to the computer.
Setup Mode
The Setup mode
be accessed from either the Video menu or the Camera menu.
/ Enable
is found in both the video and photo modes and can
27