Table of Contents
Advertisement
2. Press the OK/Joystick button to open the White Balance submenu.
3. Push the OK/Joystick button to the Right/Left/Up/Down to highlight and
select the White Balance option icon you desire:
Auto
/Daylight
4. Press the OK/Joystick button to confirm, save your choice and exit to
the Setting menu.
5. Press the MENU button to revert back to the Photo capture mode to start
capturing photos with the new white balance setting selected.
Note:
After selecting your White Balance choice, the corresponding icon will
appear on the top of the LCD screen.
Exposure
This setting allows you to manually compensate for unusual lighting
conditions such as indirect indoor lighting, dark backgrounds, and strong
backlighting. The exposure value range is –2.0 (Dark) to 2.0 (Bright)
1. Push the OK/Joystick button to the Right/Left/Up/Down to select the
Exposure
2. Press the OK/Joystick button to open the Exposure submenu.
3. Push the OK/Joystick button to the Left/Right to select the exposure
setting as per the present light condition:
EV-2.0 / EV-1.7 / EV-1.3 / EV-1.0 / EV-0.7 / EV-0.3 / EV+0.0 / EV+0.3 /
EV+0.7/ EV+1.0 / EV+1.3 / EV+1.7/ EV+2.0
4. The Exposure effect selected automatically appears on the LCD.
5. Press the OK/Joystick button to confirm, save your choice and exit to
the Setting menu.
6. Press the MENU button to revert back to the Photo capture mode to start
capturing photos with the new EV exposure setting selected.
/Cloudy
menu icon.
25
/Fluorescent
/ Tungsten
Advertisement
Table of Contents
