Vivitar DVR 820HD Owner's Manual page 24

select the Flash Setup option icon you desire:
Auto
4. Press the OK/Joystick button to confirm, save your choice and exit to
the Setting menu.
5. Press the MENU button to revert back to the Photo capture mode.
6. Press the Capture button to capture the photo using the flash option you
selected.
Note:
After selecting your Flash Setup choice, the corresponding icon will appear
on the top of the LCD screen.
Selecting the Auto choice will let the camcorder decide when to use the
flash in the present lighting conditions.
Quality
This setting is used to
file size smaller. While this has the advantage of enabling you to squeeze
more photos into the available memory, picture quality is sacrificed.
1. Push the OK/Joystick button to the Right/Left/Up/Down to select the
Quality
2. Press the OK/Joystick button to open the Quality submenu.
3. Push the OK/Joystick button to the Right/Left/Up/Down to highlight and
select the Quality Setup option icon you desire:
Super
4. Press the OK/Joystick button to confirm, save your choice and exit to
the Setting menu.
/ Forced / Off
compress the pictures you take in order to make their
menu icon.
/ Fine / Normal
23