Table of Contents
Advertisement
FERtech 25 OV
2. INSTALLATION
2.1 General Instructions
This device must only be used for the purpose for which it is specially designed. This unit is
designed to heat water to a temperature below boiling point and must be connected to a heat-
ing system and/or a water supply system for domestic use, compatible with its performance,
characteristics and its heating capacity. Any other use is considered improper.
BOILER INSTALLATION MUST ONLY BE PERFORMED BY QUALIFIED PERSONNEL, IN ACCORDANCE
WITH ALL THE INSTRUCTIONS GIVEN IN THIS TECHNICAL MANUAL, THE PROVISIONS OF CURRENT
LAW, THE RECOMENDATION OF BS STANDARDS, ANY LOCAL REGULATIONS AND THE RULES OF
COMPETENT WORKMANSHIP.
Incorrect installation can cause damage or physical injury for which the manufacturer declines any re-
sponsibility.
This appliance must be installed strictly in accordance with these instructions and
regulations:
The Gas Safety Regulations (Installations & Use).
The Local Building Regulations.
The Building Regulations (Part L).
The Buildings Standards (Scotland - Consolidated) Regulations.
British Standards Codes of Practice:
B.S.
5440
Part 1
B.S.
5440
Part 2
B.S.
5449
FORCED CIRCULATION HOT WATER SYSTEMS
B.S.
6798
INSTALLATION OF GAS FIRED HOT WATER BOILERS
B.S.
6891
GAS INSTALLATIONS
B.S.
7671
IEE WIRING REGULATIONS
B.S.
4814
SPECIFICATION FOR EXPANSION VESSELS
B.S.
5482
INSTALLATION OF LPG
B.S.
7593
TREATMENT OF WATER IN DOMESTIC HOT WATER CENTRAL HEATING SYSTEMS
B.S.
5546
INSTALLATION OF HOT WATER SUPPLIES FOR DOMESTIC PURPOSES
Model Water Bye Laws
B.S.
5955-8 PLASTIC PIPEWORK INSTALLATION
For Northern Ireland the rules in force apply
Flues
Air supply
Cod. 3540U431 - 11/2009 (Rev. 00)
9
Advertisement
Table of Contents
