Atag VA6011RF User Instructions page 32

Operating Instructions
Malfunction
The programme indicator
for the selected wash pro-
gramme is flashing,
the end wash programme
indicator is flashing in the
following rhythm: 2 short
flashes one after the other.
The end wash programme
indicator is flashing in the
following rhythm: 3 short
flashes, one after the other.
After remedying the error that is flashing in the first or second
rhythm in the programme progress display, press the button for the
wash programme that had already started. The wash programme will
continue.
If the fault is displayed again, please contact customer service.
For all other errors displayed, please contact customer service, stating
3
the error code. (See chapter "Customer Service").
32
Possible cause
The siphon is blocked.
The water drain hose has
not been correctly laid.
The leak prevention sys-
tem has been triggered.
Remedy
Clean out siphon.
Check hose installation.
Turn off the tap and con-
tact customer service.