Physical Details; Front-Mounted Leds - LevelOne FBR-1416 User Manual

4-port 10/100 mbps adsl modem router

Hide thumbs Also See for FBR-1416:

Table of Contents

FBR-1416 User Guide

Physical Details

Power LED

(Green)

Status LED

(Yellow)

LAN

WAN

Figure 2: Front Panel

On - Power on.

Off - No power.

Off - Normal operation.

Blinking - This LED blinks during start up, and during a Firmware Up-

grade.

For each port, there are 2 LEDs, to indicate the connection speed

(10BaseT or 100BaseT) of each port.

•

100BT - This will be ON if the LAN connection is using 100BaseT,

and Blinking if data is being transferred via the corresponding LAN

port.

•

10BT - This will be ON if the LAN connection is using 10BaseT, and

Blinking if data is being transferred via the corresponding LAN port.

•

If neither LED is on, there is no active connection on the correspond-

ing LAN port.

On - ADSL connection is available.

Off - No ADSL connection.

Flashing - Data is being transmitted or received via the ADSL connection.

Table of Contents