Table of Contents
Advertisement
Display and Features
Start pad
The Start pad is
used to begin a
manual time entry cooking cycle.
Stop/Reset
pad
The Stop/Reset pad
stops a cooking sequence in
progress, clears out any remaining
time, and also ends a
programming or user option cycle.
When the Stop/Reset pad is used
to end a programming or option
change, the changes are
discarded.
Temperature warnings
The combination oven has two
distinct temperature warnings.
Warnings sound with a three beep
signal when a programmed pad is
pressed. Warnings are:
•
A warning when the preheat
temperature does not match the
preprogrammed temperature of
a cooking condition.
•
A warning when the actual
oven cavity temperature is not
to preheat temperature, such
as when the oven is first
started.
To override the warning and begin
a cooking cycle, press the Start
pad. To turn off warnings, see User
Options section.
(cont'd)
Cooking Display
DISPLAYS
OVEN
PREHEATING
450°F
READY 450°F
00:00
MW 50%
ITEM-05
STAGE 1
STANDBY
Programming Display
DISPLAYS
Enter Program
to Add/Review:
STAGE 1
6
DESCRIPTION
Oven Preheating 450°F displays when oven
turned on and is warming up to the selected
preheat temperature. Oven Preheating also
flashes when a cooking condition can be started
programmed.
(example of 450°F shown)
Ready 450°F displays when oven has reached
preheat temperature and is ready to cook. Read
also flashes when a cooking condition can be
started or programmed.
Displays cooking time. If stage cooking is
programmed, total cooking time is displayed.
MW 50% displays the current microwave powe
level. 100% is the highest setting, and 0% is low
(no microwave energy used).
ITEM-05 displays the single or double digit entr
of a programmed cooking condition when using a
programmed pad.
(example of Item 05 shown)
Stage 1 displays to show the stage number (1
through 4) the oven is at in the cooking condition
STANDBY displays when oven is turned off, an
also after the oven is plugged in, the door is
opened, and then shut.
DESCRIPTION
Displays when oven is in programming mode for
single pad or double pad memory.
Displays stage number during cooking or when
programming a specific cooking stage. Stage
number (1 through 4) indicates the stage that is
being used.
(example of 450°F shown)
(example of 50% show
Advertisement
Table of Contents
