User Options - Amana Commercial Combination Oven Owner's Manual

User Options

Didn't like an option?
Factory settings are marked in bold. To
change the oven back to the factory
setting, simply select the option that is
marked in bold.
?
My changes weren't
saved.
In order for any changes to be
saved, the Program Save pad must be
pressed after selecting an option.
Pressing the Stop/Reset pad will not
save changes.
Numbered Pads
1
Double Digit Entry
2
Manual Programming
3
Reset on Door Open
4
Keybeep
5
Speaker Volume
6
End of Cook Signal
7
Keypad Active
8
Preheat Warning
TEMP PAD
Temperature Units
STAGE PAD
Clean Filter Message
(Frequency)
Changing user options
Options such as single or double pad programming, beep volume, and
maximum cooking time can be changed to suit individual preferences.
To change options oven STANDBY must display:
1. Press hidden pad.
• Pad is unmarked and located to the direct left of Preheat On/Off pad.
• Nothing will be displayed when hidden pad is pressed.
2. Press Program Save pad.
• The first user option will display. Oven is now in options mode.
3. Press number pad that controls option to be changed.
• See table below for options.
• Current option will display.
4. Press numeric pad again to change the option.
• Each time pad is pressed, option will change.
• Match code displayed with code for desired option.
• To change additional options, repeat steps 3 and 4.
• Changes take affect after pad is pressed.
5. Press Stop/Reset pad to return to STANDBY, or open and close oven door.
Display Options (Factory Settings in Bold)
Disabled Allows 10 (0-9) preprogrammed pads.
Enabled Allows 100 (00-99) preprogrammed pads.
Disabled Manual time entry/cooking not allowed
Enabled Manual time entry/cooking allowed
Disabled Opening oven door does not reset oven back to ready mode
Enabled Opening oven door resets the oven back to ready mode
OFF Keys do not beep when pressed (keybeep off)
ON Keys beep when pressed (keybeep on)
OFF Keybeep volume OFF
LOW Keybeep volume LOW
MEDIUM Keybeep volume MEDIUM
HIGH Keybeep volume HIGH
Solid Beep Food done signal is a continuous beep until reset by user
3 Second Beep Food done signal is a three second beep
4 Beeps Once Food done signal is four beeps, continuously
4 Beeps Repeating Food done signal is four beeps, four times
15 SECONDS Keypad time entry window is 15 seconds
30 SECONDS Keypad time entry window is 30 seconds
60 SECONDS Keypad time entry window is one minute
120 SECONDS Keypad time entry window is two minutes
ALWAYS Keypad time entry window is always active
Disabled Both temperature warnings off
Program Warning Only Warning only when preheat temperature does not match preprogrammed temperature
Preheat Warning Only Warning only when actual oven cavity temperature is not to preheat temperature
Both Both temperature warnings on
FAHRENHEIT Temperatures are displayed in °F for 60 Hz models
CELSIUS Temperatures are displayed in °C for 50 Hz models
Disabled Oven will not display Clean Filter
Weekly Oven will display Clean Filter every seven (7) days
Monthly Oven will display Clean Filter every thirty (30) days
Quarterly Oven will display Clean Filter every ninety (90) days
10