Gemini XL-500 II Operation Manual

Direct-drive manual turntable

Hide thumbs Also See for XL-500 II:

Table of Contents

OPERATIONS MANUAL

Bedienungsanleltung

Manual de funcionamiento

Manual de fonctionnement

Manual del utente

XL-500 II

DIRECT-DRIVE MANUAL TURNTABLE

Handdrehscheibe mit Direktantrieb

Giradiscos manual de accionamiento directo

Table tournante manuelle à entraînement direct

Giradischi manuale a comando diretto

Table of Contents

Need help?

Do you have a question about the XL-500 II and is the answer not in the manual?

Page 1 OPERATIONS MANUAL Bedienungsanleltung Manual de funcionamiento Manual de fonctionnement Manual del utente XL-500 II DIRECT-DRIVE MANUAL TURNTABLE Handdrehscheibe mit Direktantrieb Giradiscos manual de accionamiento directo Table tournante manuelle à entraînement direct Giradischi manuale a comando diretto...
Page 2 Figure 1 Page 1...
Page 3 Figure 2 Figure 3 Page 2...
Page 4 Introduction CARTRIDGE INSTALLATION: (SEE FIG. 2) Congratulations on purchasing a Gemini XL-500 II turntable. This state of the art turntable includes the latest features. Prior to use, we suggest that Because all cartridges have their own designs, please refer to your you carefully read all the instructions.
Page 5 ADJUSTING THE PITCH CONTROL: 1. Mount the hinges onto the dustcover. 1. The XL-500 II is equipped with a PITCH CONTROL (21). When the PITCH CONTROL is in the center position the speed will be 33 or 45 2. Hold the dustcover in position, directly above the turntable, and slide the depending on which SPEED SELECTOR (15) is pushed.
Page 6 Information in this manual is subject to change without notice and does not represent a commitment on the part of the vendor. Gemini Sound Products Corp. shall not be liable for any loss or damage whatsoever arising from the use of information or any error contained in this manual.