Memory Storage & Recall - Yaesu FT-23R MKII Operating Manual

Operation
offers ten programmable memory channels, numbered [ 0 ] through [ 9 ] .
The FT-23R
MK ‡U
To store a frequency in memory:
r Select the desired frequency in the Dial mode as described above,
r Press [ F ] + [ M ] (the Memory number will blink) and select the desired Memory num-
ber for storage using the DIAL selector or [ p ] / [ q ] keys,
r Press [ D/MR ] to store the Dial frequency into the selected Memory: The Memory
number should disappear, and operation will continue in the Dial mode.
Once you press [ F ] + [ M ] in the above procedure, while the Memory number is blinking,
you have a maximum of four seconds between DIAL selections or keystrokes until you
press [ D/MR ] . If you time out, a memory number will be displayed after you press [ D/MR ]
(and nothing new will have been stored in the memory). Simply start again. Remember that
when you store data in memory, the data previously stored in that channel (if any) erased.
Example: to store 145.00 MHz in channel [ 0 ]
r Press [ D/MR ] once if a Memory number is displayed, to select the Dial mode. Then
use the DIAL selector or [ p ] and [ q ] keys to select 145.000 on the display.
r Press [ F ] + [ M ] and then rotate the DIAL knob until [ 0 ] is displayed (blinking) at the
upper left corner.
r Press [ D/MR ] . There should now be no memory number displayed. If there is, you
timed out and should start again.
To recall prestored memories press [ D/MR ] , if necessary, to select the Memory mode
(Memory number is displayed), and then rotate the DIAL selector or press the [ p ] and [ q ]
keys, which select the memories when in the Memory mode (as opposed to frequency
selection in the Dial mode). Only prestored memories are displayed: empty memories are
skipped.
To exit the Memories and return to Dial mode, press [ D/MR ] .
Memory [ 0 ] is special "Call Channel Memory", which can be instantly recalled
from any mode just pressing the [ ˜ ] key. Press [ D/MR ] when finished to return to
the previously selected mode.
14
M S
EMORY TORAGE
Call Channel Memory [ 0 ]
& R
ECALL
FT-23R O
PERATING
MKII
M
ANUAL