Table of Contents
Advertisement
With "Gigabit Ethernet Controller" highlighted in the Select OEM
Option window, click OK.
The adapter files are installed, then the Network window is
displayed showing the newly installed adapter.
9. Click Close, then the Microsoft TCP/IP Properties window
appears.
10.Configure the TCP/IP protocol and click OK.
11.When prompted to restart your computer, click Yes.
III. ATI Rage XL Display Driver Installation
Windows 2000 system can correctly recognize ATI RAGE XL PCI driver during
system installation. User needs not to load any driver for supporting the on-
board ATI RAGE XL graphics chip.
IV. Enabling ATA100 Feature in Windows 2000
To enable the ATA100 feature under Windows 2000, you need to upgrade to
Windows 2000 Service Pack 2 or later.
5-10
Chapter 5: Driver Installation
Advertisement
Table of Contents
