Table of Contents
Advertisement
Connections
Connecting a device through the AUX input
Every device with an AUX output or headphones output can be connected to the
AUX input that is located in the storage compartment (18). To connect a device to the
input, the storage compartment (18) has to be opened first. After opening the
compartment, pull the AUX cable out and connect the external device as shown in
the figure below.
When the external device is connected through the AUX input, the volume can only
be controlled through the boombox. Everything else can only be controlled on the
external device. To playback sound through the AUX input, the boombox must be set
in the AUX mode. Do this by repeatedly pressing the source button (3, 29) until AU is
shown on the AU op het display (14). It's also possible to store the external AUX
device in the storage compartment (18), see chapter "Using the storage
compartment" for instructions on how to store the device in the compartment.
Charging a device through the built-in USB charger
To charge an external device, connect the device with mini USB to the built-in
charger (20) as can be seen in the figure below. Once an external device is
connected, it will start charging immediately.
19
Advertisement
Table of Contents
