Related Manuals for LENCO SCD-6000
Summary of Contents for LENCO SCD-6000
- Page 1 Portable boombox with internet / DAB+/ FM radio, Bluetooth and CD player SCD-6000 INSTRUCTION MANUAL For information and support, www.lenco.com...
-
Page 2: Class 1 Laser Product
WARNING CLASS 1 LASER PRODUCT CAUTION INVISIBLE LASER RADIATION CLASS 1 LASER PRODUCT WHEN OPEN AND INTERLOCKS APPAREIL Á LASER DE CLASSE 1 DEFEATED. PRODUCTO LASER DE CLASE 1 AVOID EXPOSURE TO BEAM This product contains a low power laser device. Warning: Do not touch the lens. -
Page 3: Installation
23.Do not allow children access to plastic bags. 24.Only use attachments/accessories specified by the manufacturer. 25.Refer all servicing to qualified service personnel. Servicing is required when the device has been damaged in any way, such as the power supply cord or the plug, when liquid has been spilled or objects have fallen into the device, when the device has been exposed to rain or moisture, does not operate normally, or has been dropped. -
Page 4: Location Of Controls
LOCATION OF CONTROLS SPEAKER 14. SELECT/ PLAY/PAUSE BUTTON BUTTON 15. REPEAT BUTTON PRESET 1 BUTTON HEADPHONES PRESET 2 BUTTON 17. POWER SWITCH PRESET 3 DISPLAY 18. VOLUME CONTROL BUTTON 19. TUNING CONTROL PRESET 4 BUTTON 20. BATTERY COMPARTMENT PRESET 5 STANDBY BUTTON 21. -
Page 5: Power Supply
TURNING ON / OFF THE UNIT Connect the device , Set the POWER switch to the ON position, LENCO SCD-6000 will be displayed for a few seconds. Please wait. Then the clock and date will be shown. Press the STANDBY... -
Page 6: Setting The Time And Date
SETTING THE TIME AND DATE 1. Long press the MENU/INFO button power on mode Turn the TUNING button backward or forward to Press the SELECT button to confirm it select " System settings". Turn the TUNING button backward or forward to select Time/Date". -
Page 7: Connection To A Network
CONNECTION TO A NETWORK 1. Long press the MENU/INFO button power on mode Turn the TUNING button backward or forward to Press the SELECT button to confirm it select " System settings". Turn the TUNING button backward or forward to select Network"... -
Page 8: Listening To Fm Radio
LISTENING TO FM RADIO Press the MODE button, turn the TUNING button backward or forward to select FM radio mode. Note: For a better reception, extend the telescopic antenna. PRESET STATIONS This unit can store 10 FM and 10 DAB/DAB+ stations. 1.Press MODE button,turn the TUNING button backward or forward to select FM or DAB/DAB+ band. -
Page 9: Program Playback
1. Press the MODE button, turn the TUNING button backward or forward to select BLUETOOTH mode. 2. Press the PAIR button and search for LENCO SCD-6000. 3. Paring the Name with mobile phone Bluetooth. Click to connect. 4. Press the PLAY/PAUSE button to play the song. -
Page 10: Listening To Podcasts
LISTENING TO PODCASTS Press the MODE button, turn the TUNING button backward or forward to select Podcasts mode. To listen to podcasts, turn the TUNING button backward or forward to select PODCASTS in the main menu and confirm by pressing the SELECT button. SELECTING PODCASTS Select PODCASTS to select from the following services : - GERMANY: Under... -
Page 11: Maintenance
AUX. IN An external (auxiliary) audio source (i.e., personal CD player or MP3 player) can be connected to this unit and heard through the speakers. 1) Plug one end of cable into the AUX IN socket on the unit. AUX. IN 2) Plug the other end of the cable into the Headphone or Line Out socket of the external source. -
Page 12: Specifications
SPECIFICATIONS S/R ratio: 55 dB Sample frequency: 44.1 kHz 8x oversampling Quantization: 1 bit DA converter Laser wavelength: 790 nm Radio Frequency range: FM: 87.5 - 108MHz DAB/DAB+: 174 - 240MHz Antenna: Telescopic Bluetooth Version: Range: WiFi: 802.11a/b/g/n - WEP, WPA,WPA2 security General Input voltage: AC 230V- 50Hz... -
Page 13: Declaration Of Conformity
Guarantee Lenco offers service and warranty in accordance with the European law, which means that in case of repairs (both during and after the warranty period) you should contact your local dealer. Important note: It is not possible to send products that need repairs to Lenco directly.