Table of Contents
Advertisement
2.5.3
Configuring the user name and password
You may change your login name and password from the KIRARARI utility.
To change the login name and password:
1.
Follow steps 1-6 on page 2-13.
2.
At the prompt, type kirarari admin name xxxxx, then press <Enter> to
change the login name.
C:\ASMB3\IKVM\MODEL\RS100-E5\PI2>kirarari admin name super
Successfully set administrator username to super
C:\ASMB3\IKVM\MODEL\RS100-E5\PI2>
3.
Type kirarari admin passwd xxxxx, then press <Enter> to change the
password.
4.
Restart the remote server, enter the BIOS setup, then boot from the hard disk
drive.
2-16
Chapter 2: Installation
Advertisement
Table of Contents
