Table of Contents
Advertisement
2.4
BIOS configuration
You need to adjust the settings in the BIOS setup of the remote server for correct
configuration and connection to the central server.
•
•
2.4.1
AMI BIOS setup
You must configure the network settings of both the remote server and the local/
central server to establish communication for remote server control and monitoring.
Running the BIOS IPMI configuration
To configure the IPMI in the BIOS:
1.
Restart the remote server, then press <Del> during POST to enter the BIOS
setup.
Go to the Advanced or Server menu, then select the IPMI Configuration
2.
sub-menu. Use this sub-menu to configure the IPMI settings.
3.
When finished, press <F10> to save your changes and exit the BIOS setup.
IPMI Configuration
Advanced
IPMI Configuration
BMC Firmware version:
View BMC System Event Log
Clear BMC System Event Log
Set LAN Configuration
BMC Watch Dog Timer Action
2-6
Update the remote server BIOS file following the instructions in the
motherboard/system user guide. Visit the ASUS website (www.asus.com)
to download the latest BIOS file for the motherboard.
The BIOS setup screens shown in this section are for reference purposes
only, and may not exactly match what you see on your screen.
001.001
v02.58 (C)Copyright 1985-2007, American Megatrends, Inc.
BIOS SETUP UTILITY
[Disabled]
View all events in the
BMC Event Log.
It will take a max. of
15 seconds to read all
BMC SEL records.
Select Screen
Select Item
Enter Go to Sub Screen
F1
General Help
F10
Save and Exit
ESC
Exit
Chapter 2: Installation
Advertisement
Table of Contents
