Table of Contents
Advertisement
KIRARARI Help Menu options
Options
kirarari reset
kirarari fw
kirarari fw upgrade <<filename>>
kirarari ip
kirarari ip set xxx.xxx.xxx.xxx
kirarari gw
kirarari gw set xxx.xxx.xxx.xxx
kirarari netmask
kirarari netmask set xxx.xxx.xxx.xxx
kirarari mac
kirarari mac set xxx.xxx.xxx.xxx
kirarari ipsrc
kirarari ipsrc set <<static / bios / dhcp>>
kirarari admin
kirarari admin name xxxxx
kirarari admin passwd xxxxx
2.5.1
Updating the ASMB3-IKVM firmware
You may use KIRARARI utility to update the ASMB3-IKVM firmware.
To update the firmware:
1.
Download the latest ASMB3-IKVM firmware from the ASUS website
(www.asus.com), and then save the file.
Save the file in a USB flash or in the hard disk drive of the remote server.
2.
Follow steps 1-6 on previous page.
3.
At the prompt, type kirarari fw upgrade rs100e51.bin, then press
<Enter> to start updating the firmware.*
4.
When the update process is complete, the following screen appears.
C:\ASMB3\IKVM\MODEL\RS100-E5\PI2>kirarari fw upgrade rs100e51.bin
Starting Firmware Upgrade
Uploading Firmware File
0% ------------------- 50% ------------------ 100%
********************************************************
Upload complete.
Flashing Firmware (takes about 1min)
Successfully upgraded firmware.
C:\ASMB3\IKVM\MODEL\RS100-E5\PI2>
2-14
Description
Reset the device for BMC card
Show firmware information
Upgrade BMC firmware
Show IP setting
Set IP to xxx.xxx.xxx.xxx
Show gateway setting
Set gateway to xxx.xxx.xxx.xxx
Show net-mask setting
Set net-mask to xxx.xxx.xxx.xxx
Show MAC setting
Set MAC to xxx.xxx.xxx.xxx
Show IP source setting
Set the IP source from static (no change)/
bios (assign by bios setting)/dhcp (get IP
from DHCP server)
Show administrator name
Set login name of administrator to xxxxx
Set login password of administrator to xxxxx
Chapter 2: Installation
Advertisement
Table of Contents
